TPMS Reset Button Hyundai Elantra (Where to Locate)

Every vehicle has different systems; sometimes, these systems can experience glitches. The TPMS is one of the systems that often experience glitches.

You may pump your tires to the manufacturer’s recommended pressure, and your TPMS indicator will still be illuminated on your dashboard, signifying that something is wrong with your tire pressure.

You do not have to be confused when scenarios like this occur because all that needs to be done is resetting the TPMS indicator.

In this article, we will explain the TPMS Reset Button on Hyundai Elantra and examine a step-by-step guide on the correct procedure for resetting the TPMS in your Hyundai Elantra.

Let’s get started!

Even after inflating your tires, sometimes the TPMS LCD indicator may still display false information; therefore, you will need to reset the TPMS to get accurate information on the condition of your tires.

The first thing you must do before resetting the TPMS is find the reset button on your Hyundai Elantra.

Normally the TPMS reset button is usually found in areas around the steering wheel, either under the steering wheel or by its side.

The location of the TPMS reset button is not the same for every model of the Hyundai Elantra; therefore, we shall be describing the location of the TPMS reset button for different models.

Where is the TPMS Reset Button on 2019 Hyundai Elantra

In more recent models like the 2019 Hyundai Elantra, the TPMS reset button is located at the left-hand side of this steering wheel, just beneath the dashboard.

Where is the TPMS Reset Button on 2013 Hyundai Elantra

Unlike the 2011 and 2012 models, the Hyundai Elantra 2013 has its TPMS reset button at the right-hand side of the steering wheel.

Where is the TPMS Reset Button on 2012 Hyundai Elantra

Like the 2011 model, The TPMS reset button for the 2012 Hyundai Elantra is located directly under the vehicle’s steering wheel but in a more central position.

Where is the TPMS Reset Button on 2011 Hyundai Elantra

For the 2011 Hyundai Elantra, The TPMS reset button is found just below the steering wheel on the right side.

Hyundai Elantra TPMS

The TPMS stands for Tire Pressure Monitoring System. Its major function is to monitor the condition of the vehicle’s tires and then relay this information to the vehicle’s ECU.

Most recent Hyundai vehicles have TPMS installed in them, and this system consists of a TPMS sensor, a TPMS LCD indicator, and a TPMS module. The TPMS sensor monitors the condition of the tires and sends its data to the TPMS module, which then sends it to the ECU before the tire pressure is displayed on your dashboard by the LCD indicator.

Generally, after a few minutes of starting your Hyundai vehicle, the LCD on your dashboard should show each tire pressure within a few minutes of driving. Even with abnormalities in your tire, like inadequate and excessive tire pressure, this LCD indicator will relay that information on your dashboard, indicating the problem and which tire it affects.

Also Read: Hyundai Palisade Limited VS Caligraphy (Comparison)

Steps to Reset TPMS On Hyundai Elantra?

If you have successfully located the TPMS reset button in your Hyundai Elantra, you can follow the steps outlined below to reset your TPMS.

Step 1: Insert your car key into its ignition and turn it to the on position but do not start the car

Step 2: Use your index finger to press and hold the TPMS reset button until the TPMS indicator blinks at least three times, then release the button

Step 3: Next, you can start the car and drive it for about 20 minutes before the TPMS indicator will reset

After following these three simple steps, you should be good to go!

Your vehicle TPMS will be reset, and accurate tire pressure information will be displayed on your dashboard. Remember, it is always advisable to carry out this procedure whenever you inflate your tires or change tires.

TPMS Does Not Reset, What to Do

If, after 15 minutes of resetting your TPMS as outlined above and the TPMS indicator does not reset, you know you have a more serious problem. It will help if you visit your local mechanic to check the situation out because there are many causes of such a scenario. These causes include poor wiring in the TPMS or a faulty TPMS sensor.

However, if you still want to give resetting your TPMS a shot, there are a few hacks you could perform to try resetting the TPMS.

• The first and most reasonable thing to do is to repeat the process of resetting the TPMS again, turn off your car’s engine then return the key to the ” on “position. Make sure that the car does not restart. The next thing you should do is to use your index finger and press down on the TPMS reset button. Keep holding it down until the TPMS indicator light blinks at least three times again. Finally, once the indicator light blinks thrice, you can release the TPMS reset button and wait (with the key still in the “on” position) for 20 minutes before switching on the car’s engine. This repeated process should reset the TPMS; if it doesn’t, we will move on to the next hack.

• Finally, you can disconnect and reconnect your vehicle’s battery if nothing else works. You would need to put off your car and then use a spanner to disconnect the positive battery terminal first. Switch the key in the ignition to the on position, then drain all power from the vehicle by either honking the horn or repeatedly flashing the headlights. Next, we connect the positive terminal of the battery. This procedure should help reset any glitches in the TPMS and course a TPMS warning indicator to disappear on your dashboard.

• If the first procedure does not work, you can manually reset the tire pressure sensors. You need to pump your tires above the manufacturer’s recommended tire pressure by 3 PSI and then reduce the tire pressures to almost 0 PSI by deflating the tires. Perform this action on each vehicle style, re-inflate each to the manufacturer’s recommended tire pressure, and drive your car for at least 15 minutes. At the end of the 15-minute drive, your TPMS should have reset itself automatically, displaying more accurate tire pressure information on your dashboard.

TPMS Low-Pressure Warning Sign, What to Do

If a tire pressure warning appears on the dashboard of your Hyundai Elantra whenever you’re driving, here is what you should do to handle the situation;

• First, you should safely drive your vehicle to an auto repair shop or car service/gas station to get your tires re-inflated
• Check the TPMS warning signal on your dashboard’s LCD at the service station and identify which tire is under-inflated.
• Check your car owner’s manual or the side of your car door to confirm the recommended manufacturer’s pressure.
• Identify if the affected tire has undergone structural damage like a puncture, tear, or leak.
• Fix the damage if there is any, but if there is none, you can move on to the next step.
• Re-inflate the tire pressure of the affected tire to the recommended manufacturer’s pressure.
• Check all the remaining tires to confirm they are at the recommended pressure if not inflated or deflate them to the manufacturer’s recommended tire pressure for each tire.

You would have fixed a low tire pressure warning with these simple steps.

Also Read: How To Reset Honda Accord Radio Code Error E

Frequently Asked Questions – TPMS Reset Button Hyundai Elantra

Conclusion – TPMS Reset Button Hyundai Elantra

The TPMS is one of the important systems in your Hyundai Elantra that protects both the wheel of your vehicle and the engine from overworking themselves. With proper tire pressure in all your tires, the vehicle moves more efficiently without putting much stress on the engine.

Therefore, having a TPMS that displays accurate information is very important, hence the need to reset the TPMS after every tire pressure readjustment or replacement. We hope the information in the article above has given insight into successfully resetting the TPMS on your Hyundai Elantra.